GTCL Civil Engineering Questions-2016

Gas Transmission Company Limited (GTCL)  is an Organisation of Petrobangla under the Ministry of Energy, Resources and Mineral. There are other organisations like GTCL under the ministry (GOVT. ENERGY AND MINERAL RESOURCES COMPANIES , BANGLADESH)   

GTCL Civil Engineering Questions

https://drive.google.com/file/d/0BzAi89eUUFoTOEFGcEJtM0loSzQ/view?usp=sharing


Job Questions (Part-I) for Mechanical Engineer

Mechanical Engineering Jobs Questions with answers:-

যন্ত্র প্রকৌশলী হিসেবে বিভিন্ন সরকারী চাকুরীর লিখিত পরীক্ষার উত্তরসহ কিছু প্রশ্নাবলীঃ 

01. Write down about Jigs. ( Bangladesh Bank -12, AD)
Answer: Jigs are used for holding and guiding the tool in drilling, reaming or tapping operations.
02. Write down about fixtures. Bangladesh Bank -12, AD)
Answer: Fixtures are used for holding the work in milling, grinding, planning or turning operations.
03. What is Newtonian Fluid? ( RPCL-13, AM)
Answer: A fluid whose viscosity does not change with the rate of deformation or shear strain is known as Newtonian fluid.
04. Write down the lathe operation. Bangladesh Bank -12, AD)
Answer: Operations which can be carried out on a lathe are as follows-
               Knurling, Threading, Boring, Chamfering, Taper turning, Plain turning, Step turning
05. What is the composition of Babbit metal? (Asuganj Power Station, AE)
Answer: A tin base alloy containing 88% tin, 8% antimony and 4% copper is called Babbit metal.
06. Define Co-efficient of contraction. Bangladesh Bank -12, AD)
Answer: It is defined as the ratio of area of jet at Vena Contracta (ac) to the area of orifice (a).
07. Define of Co-efficient of velocity. Bangladesh Bank -12, AD)
Answer: It is defined as the ratio of the actual velocity of the jet at vena contracta.
08. What is cavitation? Bangladesh Bank -12, AD)
Answer: The formation, growth and collapse of vapor filled cavities or bubbles in a flowing liquid due to local fall in fluid pressure are called cavitation.
09. Write down some refrigerants name.
Answer: List of refrigerants are mostly used-
a) R-11 (CCl3F) : Boiling Point 23.770C
b) R-12  (CCl2F2): Boiling Pint -290C
c) R-22 (CHClF2): Boiling Point -410C
d) Ammonia (NH3): Boiling Point -33.330C
10. What is system?  (Bangladesh Bank -13, AD)
Answer: The thermodynamic system may be defined as a definite area or space where some thermodynamic process takes place. The thermodynamic system may be classified into the following three groups.
o: Closed System
o: Open System
o: Isolated System
11. What is Cetane Number?
Answer: The percentage by volume of cetane in a mixture of cetane & α-methyl naphthalene which has the same ignition delay as the given fuel when tested in a specified test engine under specified condition is as cetane number. e.g. If a fuel has cetane number 45, it means that the fuel is having the same ignition delay as a mixture of 45% cetane and 55% α-methyl naphthalene by volume.

 12. Comparison between petrol Engine and Diesel Engine. (BRTA-12, AD)
Petrol Engine
Diesel Engine
A Petrol Engine draws a mixture of petrol and air during suction stroke.
A Diesel Engine only draws air during suction stroke.
The pressure at the end of compression is 10 bar.
The pressure at the end of compression is 35 bar.
The combustion of fuel takes place approximately at constant volume.
The combustion of fuel takes place approximately at constant pressure.
A Petrol Engine compression ratio approximately.
A diesel Engine compression ratio approximately from 15 to 25.
The thermal efficiency is upto about 26%.
The thermal efficiency is upto about 40%.
13. For a small scale industry, the fixed cost per month is Tk. 500 The variable cost per product is Tk. 20 and sell price is Tk. 30 per price. The Break even production per month? (BOF, AE)
Answer:
X= Break even Production per month
5000 + 20X = 30 X
X= 500
14.  What are Boiler mountings? Write down their name. (Bangladesh Bank-13, AD)
Answer: These are the fittings, which are mounted on the boiler for its proper and safe functioning.
Water level Indicator, Pressure Gauge, Safety valves, Steam stop valve, Blow-off-Cock, Fusible plug.
15. What is stiffness of a spring? (PDB-12, Asuganj -13, AE)
Answer: Load required producing a unit deflection in a spring. 

BUET VC passes away




Professor Dr. Khaleda Ekram, The first female vice chancellor of Bangladesh University of Engineering & Technology (BUET) passes away on last night approximately at 3.00 AM. ( Inna lillahi wainna ilahi rajiown). She breathed her last at a hospital in Bankok, capital of Thailand. Professor Ekram was appointed as the vice Chancellor of BUET on September 2014. May Allah keep her soul in peace.
Khaleda Ekram, first female vice chancellor of the Bangladesh University of Engineering and Technology (Buet), passed away at a hospital in Bangkok last night.
She was taken to a Bangkok Hospital from Square Hospital on late Friday night by an air ambulance for better treatment.
Her condition was deteriorated since Monday as her kidneys and other organs did not work properly. She was kept on life support.
She was also fighting against leukemia and breathed her last in Thailand at around 3:00am on Tuesday.
Professor Khaleda Ekram of the Architecture Department was appointed as the vice chancellor (VC) of Bangladesh University of Engineering and Technology on September 11, 2014.
Khaleda is the first female vice chancellor of Buet and the second female vice chancellor of the country.
- See more at: http://en.bbarta24.net/national/2016/05/24/2096#sthash.s8Kh1GF8.dpuf
Khaleda Ekram, first female vice chancellor of the Bangladesh University of Engineering and Technology (Buet), passed away at a hospital in Bangkok last night.
She was taken to a Bangkok Hospital from Square Hospital on late Friday night by an air ambulance for better treatment.
Her condition was deteriorated since Monday as her kidneys and other organs did not work properly. She was kept on life support.
She was also fighting against leukemia and breathed her last in Thailand at around 3:00am on Tuesday.
Professor Khaleda Ekram of the Architecture Department was appointed as the vice chancellor (VC) of Bangladesh University of Engineering and Technology on September 11, 2014.
Khaleda is the first female vice chancellor of Buet and the second female vice chancellor of the country.
- See more at: http://en.bbarta24.net/national/2016/05/24/2096#sthash.s8Kh1GF8.dpuf

BREB Assitant Engineer (Mechanical) questions


Bangladesh Rural Electrification Board (BREB) 
Post: Assistant Engineer (Mechanical)
22) Carbide tipped tools usually have
a) Negative rank angle
b) Positive rank angle
c) Any rake angle
d) No rake angle

23) The type of tool used on lathe, shaper and planer is -
a) Single point cutting tool
b) Two point cutting tool
c) Three point cutting tool
d) Multi point cutting tool

24) The process extensively used for making bolts and nuts is
a) Hot piercing
b) Extrusion
c) Cold peering
d) Cold heading

25) Cold working of metal increases
a) Tensile strength
b) Yield strength
c) Hardness
d) All of above

26) Ball bearings are, usually made from
a) Low carbon steel
b) High Carbon steel
c) High speed steel
d) All of the above

27) Cast Iron has
a) High compressive strength
b) Good wear resistance
c) Excellent machinability

28) The Property of a material which enables it to retain the deformation permeability is called
a) Brittleness
b) Ductility
c) Plasticity
d) Malleability

29) The size of gear is usually specified by
a) Pressure angle
b) Pitch Circle diameter
c) Circular Pitch
d) Tooth thickness

30) A spring is used to
a) Measure forces
b) Apply forces
c) Store energy
d) All of the above

31) An universal coupling is used to connect two shafts
a) Which are perfectly aligned
b) Which are not in exact alignment
c) Have lateral misalignment
d) Whose axes intersect at a small angle

32) The material generally used for air-craft components is
a) Mild steel
b) High Speed steel
c) Stainless Steel
d) Aluminum

33 ) The property of a material which enable it to be drawn into the wire with the application of a tensile force, is called
a) Plasticity
b) Elasticity
c) Ductility
d) Malleability

34) The power from the engine to the rear axle of an automobile is transmitted by
a) Worm and worm wheel
b) Super gears
c) Bevel gears
d) Hooks joint

35) In Mechanical refrigeration system, the refrigerant has the maximum temperature
a) In evaporator
b) Before expansion valve
c) Between compressor and condenser
d) Between condenser and evaporator

36) The amount of radiation mainly depends upon the
a) Nature of the body
b) Temperature of the body
c) Type of surface of the body
d) All of the above