KUET admission Test 2016

The Bachelor degree admission test for the academic session 2016-17 of Khulna University of Engineering and Technology (KUET) will be held on October 28, 2016.




Section officer Monoj Kumar Majumder , the Public relations and information's confirmed the matter on June 23, 2016 (Thursday).

He informed that the decision came after meeting between admission committee members and university Vice-Chancellor.

The undergraduate course includes-B. Sc. Engineering & Bachelor of Urban and Regional Planning (BURP).
The admission test of B.Sc Engineering and Bachelor of Urban and Regional Planning (BURP) will be held from 9:00 am to 12:30 pm on the day. At present there are 11 departments in KUET.
Admission test system: How to Apply
 

Srilanka Institute of Information Technology (SLITE) Scholarships

Srilanka Institute of Information Technology (SLITE) Scholarships for Higher studies

Srilanka Institute of Information Technology (SLITE) is a leading degree awarding institute in Srilanka. It is  approved by the University Grants Commission (UGC) under the Universities Act. The institute is a members of the Association of Commonwealth Universities (ACU), as well as the International Association of Universities (IAU).
SLIIT was established in 1999. They offer both undergraduate and postgraduate courses, and accommodate over 7000 students, including international students from various regions in the world. 
This SLITE is offering Scholarships programs for Bachelor Degree Programs.
Detail information's are available on -  

GTCL Civil Engineering Questions-2016

Gas Transmission Company Limited (GTCL)  is an Organisation of Petrobangla under the Ministry of Energy, Resources and Mineral. There are other organisations like GTCL under the ministry (GOVT. ENERGY AND MINERAL RESOURCES COMPANIES , BANGLADESH)   

GTCL Civil Engineering Questions

https://drive.google.com/file/d/0BzAi89eUUFoTOEFGcEJtM0loSzQ/view?usp=sharing


Job Questions (Part-I) for Mechanical Engineer

Mechanical Engineering Jobs Questions with answers:-

যন্ত্র প্রকৌশলী হিসেবে বিভিন্ন সরকারী চাকুরীর লিখিত পরীক্ষার উত্তরসহ কিছু প্রশ্নাবলীঃ 

01. Write down about Jigs. ( Bangladesh Bank -12, AD)
Answer: Jigs are used for holding and guiding the tool in drilling, reaming or tapping operations.
02. Write down about fixtures. Bangladesh Bank -12, AD)
Answer: Fixtures are used for holding the work in milling, grinding, planning or turning operations.
03. What is Newtonian Fluid? ( RPCL-13, AM)
Answer: A fluid whose viscosity does not change with the rate of deformation or shear strain is known as Newtonian fluid.
04. Write down the lathe operation. Bangladesh Bank -12, AD)
Answer: Operations which can be carried out on a lathe are as follows-
               Knurling, Threading, Boring, Chamfering, Taper turning, Plain turning, Step turning
05. What is the composition of Babbit metal? (Asuganj Power Station, AE)
Answer: A tin base alloy containing 88% tin, 8% antimony and 4% copper is called Babbit metal.
06. Define Co-efficient of contraction. Bangladesh Bank -12, AD)
Answer: It is defined as the ratio of area of jet at Vena Contracta (ac) to the area of orifice (a).
07. Define of Co-efficient of velocity. Bangladesh Bank -12, AD)
Answer: It is defined as the ratio of the actual velocity of the jet at vena contracta.
08. What is cavitation? Bangladesh Bank -12, AD)
Answer: The formation, growth and collapse of vapor filled cavities or bubbles in a flowing liquid due to local fall in fluid pressure are called cavitation.
09. Write down some refrigerants name.
Answer: List of refrigerants are mostly used-
a) R-11 (CCl3F) : Boiling Point 23.770C
b) R-12  (CCl2F2): Boiling Pint -290C
c) R-22 (CHClF2): Boiling Point -410C
d) Ammonia (NH3): Boiling Point -33.330C
10. What is system?  (Bangladesh Bank -13, AD)
Answer: The thermodynamic system may be defined as a definite area or space where some thermodynamic process takes place. The thermodynamic system may be classified into the following three groups.
o: Closed System
o: Open System
o: Isolated System
11. What is Cetane Number?
Answer: The percentage by volume of cetane in a mixture of cetane & α-methyl naphthalene which has the same ignition delay as the given fuel when tested in a specified test engine under specified condition is as cetane number. e.g. If a fuel has cetane number 45, it means that the fuel is having the same ignition delay as a mixture of 45% cetane and 55% α-methyl naphthalene by volume.

 12. Comparison between petrol Engine and Diesel Engine. (BRTA-12, AD)
Petrol Engine
Diesel Engine
A Petrol Engine draws a mixture of petrol and air during suction stroke.
A Diesel Engine only draws air during suction stroke.
The pressure at the end of compression is 10 bar.
The pressure at the end of compression is 35 bar.
The combustion of fuel takes place approximately at constant volume.
The combustion of fuel takes place approximately at constant pressure.
A Petrol Engine compression ratio approximately.
A diesel Engine compression ratio approximately from 15 to 25.
The thermal efficiency is upto about 26%.
The thermal efficiency is upto about 40%.
13. For a small scale industry, the fixed cost per month is Tk. 500 The variable cost per product is Tk. 20 and sell price is Tk. 30 per price. The Break even production per month? (BOF, AE)
Answer:
X= Break even Production per month
5000 + 20X = 30 X
X= 500
14.  What are Boiler mountings? Write down their name. (Bangladesh Bank-13, AD)
Answer: These are the fittings, which are mounted on the boiler for its proper and safe functioning.
Water level Indicator, Pressure Gauge, Safety valves, Steam stop valve, Blow-off-Cock, Fusible plug.
15. What is stiffness of a spring? (PDB-12, Asuganj -13, AE)
Answer: Load required producing a unit deflection in a spring.