Showing posts with label Govt. Job (Engineering) Exam Question. Show all posts
Showing posts with label Govt. Job (Engineering) Exam Question. Show all posts

TITAS Civil Engineering Exam Questions

 Titas Gas Transmission and Distribution Company Ltd.

Exam. Date: 19/12/2014

Civil Engineering, Section- A, Total Marks (70)
Venue: MIST
 Answer All Ten questions.

Q.1.   What is cement? Under which condition and requirements cement is superior to

lime.
(7)
Q.2.    a. Write four physical and four mechanical properties of engineering meterials.
(4)
b. What is slum? Draw a slum cone with dimentions.
(3)
Q.3.   As shown in figure below, in the truss, F= 60 Tons and θ = 250 . Find the external
(7)
Reactions (Components at C) and the force member AB and AD.



 
 
Q.4
a. Define Evaporation, Evapotranspiration and Sodium Adsorption Ratio (SAR)
(4)

b. Define BOD. Why COD value is higher than BOD?
(3)
Q.5.
Differentiate between:
(7)

a. Zenith And Nadir


b. Segregation and Bleeding


c. Pipe flow and Open channel flow


d. Duty and Delta of the Crop

Q.6.
Write Short Note:
(7)

a. Parallux Error


b. Traverse Surveying


c. Curb


d. Flocculation

Q.7.
Explain the following:
(7)

a. Buckling of Column


b. Admixure


c. Development length of reinforcement bar


d. TMT 500 steel bar


Q.8.   a. Draw qualitative diagram of given size distribution curve and also show the
(4.5)
Following curve.

1)
Gap Graded

2)
Well Graded

3)
Poorly Graded

b. According to the unified soil classification system specify the meaning of the
(2.5)
following types of soil:

1)
CL

2)
MH

3)
SP

4)
OL

5)
PT


DPDC Assistant Engineer (CE) Questions


Dhaka Power Distribution Company Limited (DPDC) Post: Assistant Engineer (CE)-2014
Exam venue: BUET, Duration: 1.5 hours, Total Marks: 100 Marks 

Marks distribution: 30 marks on General knowledge (60 objectives x 0.5= 30 marks) and 70 marks on departmental questions. 
1. Sedimentation tank design: Volume, discharge given, detention time =?
2. Rain water: Area of roof, rainfall intensity, runoff coefficient given, quantity=?
3. Chlorination curve with break point
4. FM
5. Column area, reinforcement given, tie rod spacing=?
6. SFD, BMD of a simply supported beam and a flexure=?
7. pH given, [OH-] = ?
8. Angle of friction, unit wt, height given, active pressure=?
9. Surveying: length correction of engineering chain=?
10. Concrete volume, ratio given, cement bag =? 
11. Axle load on column determination.

BITAC Exam Questions- 2016

BITAC Assistant Engineer (Mechanical) Exam Questions- 29/04/16
Draw the schematic diagram of vapor absorption refrigeration system.
Find the h of gas turbine power plant, pressure given at isentropic process.
Write down the factors of improving the Efficiency of Gas Turbine Plant.
Draw the temperature profile of parallel and counter flow double pipe heat exchanger.
Find out the height from the diagram, pressure given ( r= mgh math)
Frictional head loss, hf = math.
Shear force diagram.
Find out the speed, gear train math 
Engineering drawing, TOP, LHS, FRONT VIEW
Machine design math.