TITAS Civil Engineering Exam Questions

 Titas Gas Transmission and Distribution Company Ltd.

Exam. Date: 19/12/2014

Civil Engineering, Section- A, Total Marks (70)

Venue: MIST

 Answer All Ten questions.

Q.1.   What is cement? Under which condition and requirements cement is superior to
lime.	(7)
Q.2.    a. Write four physical and four mechanical properties of engineering meterials.	(4)
b. What is slum? Draw a slum cone with dimentions.	(3)
Q.3.   As shown in figure below, in the truss, F= 60 Tons and θ = 250 . Find the external	(7)
Reactions (Components at C) and the force member AB and AD.

 

 

Q.4

	a. Define Evaporation, Evapotranspiration and Sodium Adsorption Ratio (SAR)	(4)
	b. Define BOD. Why COD value is higher than BOD?	(3)
Q.5.	Differentiate between:	(7)
	a. Zenith And Nadir
	b. Segregation and Bleeding
	c. Pipe flow and Open channel flow
	d. Duty and Delta of the Crop
Q.6.	Write Short Note:	(7)
	a. Parallux Error
	b. Traverse Surveying
	c. Curb
	d. Flocculation
Q.7.	Explain the following:	(7)
	a. Buckling of Column
	b. Admixure
	c. Development length of reinforcement bar
	d. TMT 500 steel bar

Q.8.   a. Draw qualitative diagram of given size distribution curve and also show the

		(4.5)
Following curve.
1)	Gap Graded
2)	Well Graded
3)	Poorly Graded
b. According to the unified soil classification system specify the meaning of the		(2.5)
following types of soil:
1)	CL
2)	MH
3)	SP
4)	OL
5)	PT

DPDC Assistant Engineer (CE) Questions

Dhaka Power Distribution Company Limited (DPDC) Post: Assistant Engineer (CE)-2014

Exam venue: BUET, Duration: 1.5 hours, Total Marks: 100 Marks 

Marks distribution: 30 marks on General knowledge (60 objectives x 0.5= 30 marks) and 70 marks on departmental questions. 

1. Sedimentation tank design: Volume, discharge given, detention time =?

2. Rain water: Area of roof, rainfall intensity, runoff coefficient given, quantity=?

3. Chlorination curve with break point

4. FM

5. Column area, reinforcement given, tie rod spacing=?

6. SFD, BMD of a simply supported beam and a flexure=?

7. pH given, [OH-] = ?

8. Angle of friction, unit wt, height given, active pressure=?

9. Surveying: length correction of engineering chain=?

10. Concrete volume, ratio given, cement bag =? 
11. Axle load on column determination.

DUET Admission result 2016

The undergraduate admission test of  Dhaka University of Engineering  & Technology (DUET) was held on 19th May 2016. The application submission date started from 31 march 2016 and the deadline was 2nd may 2016. A large numbers of diploma pass students were participated in this exam. There are mainly four faculties Electrical & Electronics Engineering, Mechanical Engineering, Civil Engineering, and Faculty of Engineering .

Masters in Agriculture

Masters in Agriculture in different universities for the Autumn session-2016 is going on. The Bangabandhu Sheikh Mujibar Rahman Agricultural University (BSMRAU)  recently published the notice for masters program in different agricultural subjects for the Autumn session-2016. 

Bangabandhu Sheikh Mujibar Rahman Agricultural University (BSMRAU):

Bangabandu Sheikh Mujibar Rahaman Agricultural University are offering  Masters and Ph.D Program for Agroforestry and Environment, Agro-Processing,Agronomy,  Biotechnology  Crop Botany, Environmental Science , Entomology, Genetics & Plant Breeding, Horticulture, Plant Pathology, Soil Science , Seed Science and Technology, Aquaculture  Fisheries Biology & Aquatic Environment, Genetics and Fish Breeding , Animal Nutrition etc.

 
Eligibility for MS Program: Candidates must have a bachelor degree with a minimum GPA 3.00 (Out of 4.00) from BSMRAU or a bachelor degree with a minimum GPA 3.00 (out of 4.00) from a recognized university/institution.

Engineering Admission Aid

Those who are willing to get admitted in Engineering Universities like BUET, KUET, RUET, MIST, IUT, DUET, CUET , AUST etc  some useful  unit conversions are given here for them.

35th BCS Preleminary exam questions with Answer

 

BITAC Exam Questions- 2016

BITAC Assistant Engineer (Mechanical) Exam Questions- 29/04/16

Draw the schematic diagram of vapor absorption refrigeration system.

Find the h of gas turbine power plant, pressure given at isentropic process.

Write down the factors of improving the Efficiency of Gas Turbine Plant.

Draw the temperature profile of parallel and counter flow double pipe heat exchanger.

Find out the height from the diagram, pressure given ( r= mgh math)

Frictional head loss, h_f = math.

Shear force diagram.

Find out the speed, gear train math 

Engineering drawing, TOP, LHS, FRONT VIEW

Machine design math.

BOF recruitment test 2016

Bangladesh Ordinance Factory (BOF), Assistant Engineer (Mechanical) Recruitment test-2016

01. What is the difference between reciprocating and rotary Engine?

02. Write down the significance of Mohr’s Circle?

03. What is engineering stress-strain curve and true Stress-strain?  

04. Write down the second law of Thermodynamics.

05. What is the difference between fire tube and water tube boiler?

06. Elaborate the abbreviate words: EFI, VVT, VVTI, ABC, VOSC

07. Describe the cetane and octane number.

ICT related abbreviated words

Wi-Fi - Wireless Fidelity.
HTTP - Hyper Text Transfer Protocol.
HTTPS -  Hyper Text Transfer Protocol Secure.
URL - Uniform Resource Locator.
IP -  Internet Protocol
VIRUS - Vital Information Resource Under Seized.
SIM - Subscriber Identity Module.
3G - 3rd Generation.
GSM -Global System for Mobile Communication.
CDMA - Code Division Multiple Access.
UMTS - Universal Mobile Telecommunication System.
RTS - Real Time Streaming.
AVI - Audio Video Interleave.
SIS Symbian OS Installer File.
AMR - Adaptive Multi-Rate Codec
JAD - Java Application Descriptor
JAR - Java Archive
MP3- MPEG player lll
3GPP- 3rd Generation Partnership Project
3GP -3rd Generation Project
MP4 -MPEG-4 video file
AAC - Advanced Audio Coding
GIF - Graphic Interchangeable Format
BMP -Bitmap
JPEG -Joint Photographic Expert Group
SWF -Shock Wave Flash
WMV -Windows Media Video
WMA -Windows Media Audio
WAV -Waveform Audio

CUET opens on Tuesday

The academic activities of Chittagong University of Engineering and Technology (CUET) will resume on Tuesday 3rd May 2016, 26 days after it was shut while there was a  demonstration of the students with their 9-point demand including the resignation of Student Advisor Prof Dr Ashitosh Shah.However, the students' dormitories will open on Monday 7.0 AM, CUET notice.
The CUET was indefinitely closed on 7th April, 2016  while there was  demonstration of the students with their 9-point demand including the resignation of Student Advisor Prof Dr Ashitosh Shah.

Walton recruitment test

Recruitment test for maintenance Engineer at Walton (full marks: 50) :-
01. Write down different types of bearing. Give some applications of bearing.
02. Differentiate between pneumatic system and hydraulic system.
      Write down some international  hydraulic oils.
03. What is solenoid valve, safety valve, pressure regulator, accumulator.
      Difference between safety valve and relief valve.
04. Difference between compressor and blower. Difference between hydraulic pump and hydraulic motor.
05. What is the difference between schedule maintenance and corrective maintenance.

Bangladesh Bank AD exam -2016

IEEE Signal Processing Cup 2016- BUET the grand prize winner

Its an great news for Bangladesh that the undergraduate students from the Dept. of Electrical & Electronics Engineering have won the IEEE Signal Processing (SP) Cup 2016.On March 2016 in Shanghai, China the  IEEE Signal Processing Cup 2016 Global Competition final competition held  at the IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP). Many teams from around the world participated in the competition and three top teams were invited to present their work at ICASSP 2016.

The grand prize goes to Team " Resonance_1011 of Bangladesh University of Engineering & Technology (BUET), Bangladesh. The Supervisor was Mr.  Mohammad Ariful Haque. The second position was secured by the Purdue, USA team. The team from IIT and IISc, India became the third.  A prize money of 5000 USD will be awarded to the champion team.Congrats the participant for bringing such a glory for us.The details of the competition can be found in:

http://www.icassp2016.org/SPCup.asp

student loan in bangladesh

Education Loan in Bangladesh for Students

Now-a-days many banks are operating in Bangladesh. Many students from different middle-class family are very eager to do their graduation from universities in different faculties. But sometimes due to financial problems they failed and their dreams are broken. It’s a matter of happiness for those students who have talent as well as eager to complete their graduation in different faculties from universities that different commercial bank with their different scheme comes forward to help them.  Student loan a new concept introduced in many banks.

IFIC Bank is one them is offering loans for students. PARUA (EDUCATION LOAN) the name of the IFIC bank education loan scheme is providing maximum Tk. 8.00 lac to be repayable in 12 to 48 monthly Installments. Some documents are needed for getting the line. To get more information about the loan procedure it needs to contact in  the nearest  BRANCHES.   

Mercantile Bank Education Loan:-

The Mercantile Bank Limited also provides EDUCATION LOAN may for any student of Bangladeshi National with excellent educational track record. Their scheme  provide financial assistance for further educational purposes like study abroad or within the country. The Mercantile Bank Payment will be made directly to the educational institutions and reimbursement to the borrower against proper receipt. Their maximum loan amount is  5 lacs for studying at home and 20 lacs for studying abroad. 

NCC Bank Education Loan:-

Thinking of higher studies abroad? Just think of us first - it is the theme of the NCC BANK education loan scheme. The loan limit is Minimum: BDT 100,000 and Maximum: BDT 1,000,000.The eligibility of the applicant is as:- Any Bangladeshi bonafide student, after successful completion of at least H.S.C,  complied all preconditions for getting admission and Visa formalities, have no bad reputation e.g. Criminal Record, Political connection etc.

Trust Bank Education Loan:-

TRUST BANK have also education loan scheme for students. To meet financial needs for higher education NCC bank provide 0.5 lac to 3 lacs to each student. The segments are: Confirmed Service holders, Businessman,  professionals and the age - Min. 25 years at the time of Application and Max. 60 years or Up to retirement age (whichever is Lower) at the end of Loan Tenure.

Prime Bank Limited Education loan:-

'Education Loan' of PRIME BANK is providing at easy terms and rates to the potential student. The features of Prime Bank education loans are- Shortest loan processing time, Competitive interest rate, Life insurance facility covering your payment obligations in the event of your death, Flexible repayment schedule, arly, full and partial settlement allowed, minimal documents etc.

UCB Education Loan:-

For educational purposed UCB have education loan scheme. Depending on parents income they offer the loan. Minimum income Tk .12,000 for salaried individuals and Tk. 25,000 for businessman whereas Tk. 10,000 for employees of Government, Semi government and Autonomous bodies. The maximum term of loan is 05 years. 1% of loan amount will be deducted as service charges.

Admission: IBA-JU WMBA Summer 2016

IBA-Jahangirnagar University Weekend MBA Summer 2016

Requirements:

1) A Bachelor degree in any Field of Study with no third division/class or CGPA below 2.50 at any level. 

Admission Procedure:

1) The admission test will comprise of a written test followed by a viva - voce examination. The duration of the written test will be 1hour. This examination aims to measure the linguistic, analytical, and quantitative skill of a candidate. A successful candidate must pass both tests independently.

DUET undergraduate admission test 2015-16

BAPEX Assistant Engineer (Mechanical) written Exam 2016

BAPEX Assistant Engineer (Mechanical) written Exam 2016

 

01. Draw the typical room temperature stress-strain curve for i) Steel ii) ceramic iii) Polymer materials

02. Write the T-S Diagram of Re-heat cycle.

03. Write down five technologies that can be employed to store energy.

04. Abbreviate: LHMD

05. A vapor compression refrigeration system has handled a cooling load of 2 ton. Find the power of the compression in KW if COP is 3.5

06. Write down three failure theories applied on ductile materials and two failure theories applied on brittle materials.

07. Define bending moment and shear force diagram.

08. Write down the Bernoulli’s equation and solve a mathematical problem.

09. Draw a schematic boiler diagram.

37th BCS circular 2016